M Reza Naimi-Jamal Department of Chemistry, Iran University of Science and Technology, Iran


Yari, H.; Mohseni, M.; Ranjbar, Z.; Messori, M.; Naimi-Jamal, M. R., Novel toughened automotive clearcoats modified by a polyester-amide hyperbranched polymer: Structural and mechanical aspects. Polymers for Advanced Technologies 2013, 24 (5), 495-502.

Shokrieh, M. M.; Hosseinkhani, M. R.; Naimi-Jamal, M. R.; Tourani, H., Nanoindentation and nanoscratch investigations on graphene-based nanocomposites. Polymer Testing 2013, 32 (1), 45-51.

Molazemhosseini, A.; Tourani, H.; Naimi-Jamal, M. R.; Khavandi, A., Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica. Polymer Testing 2013, 32 (3), 525-534.

Kaupp, G.; Naimi-Jamal, M. R., Penetration resistance and penetrability in pyramidal (nano)indentations. Scanning 2013, 35 (2), 88-111.

Houshyar, A.; Khavandi, A. R.; Javadpour, J.; Samani, S.; Naimi-Jamal, M. R.; Atai, M., Enhancement of mechanical properties of experimental composite by Fuller's earth nanofibers for cervical restoration. Journal of Biomedical Materials Research - Part B Applied Biomaterials 2013, 101 B (6), 911-918.

Arzephoni, A. Y.; Naimi-Jamal, M. R.; Sharifi, A.; Abaee, M. S.; Mirzaei, M., [Omim][Bf4] ionic liquid, a green and recyclable medium for one-pot aminomethylation of electron-rich aromatic compounds. Journal of Chemical Research 2013, 37 (4), 216-218.

Amirnejad, M.; Naimi-Jamal, M. R.; Tourani, H.; Ghafuri, H., A facile solvent-free one-pot three-component method for the synthesis of 2-amino-4H-pyrans and tetrahydro-4H-chromenes at ambient temperature. Monatshefte fur Chemie 2013, 144 (8), 1219-1225.

Ali, E.; Naimi-Jamal, M. R.; Dekamin, M. G., Highly efficient and rapid synthesis of imines in the presence of nano-ordered MCM-41- SO3H heterogeneous catalyst. Scientia Iranica 2013. 9. Tourani, H.; Naimi-Jamal, M. R.; Dekamin, M. G.; Amirnejad, M., A rapid, convenient and chemoselective synthesis of acylals from aldehydes catalyzed by reusable nano-ordered MCM-41-SO 3H. Comptes Rendus Chimie 2012, 15 (11-12), 1072-1076.

Naimi-Jamal, M. R.; Mokhtari, J.; Dekamin, M. G.; Javanshir, S.; Hamzeali, H., Efficient synthesis and deprotection of semicarbazones under solvent-free conditions. Iranian Journal of Chemistry and Chemical Engineering 2012, 31 (2), 1-8.

Javaheri, M.; Naimi-Jamal, M. R.; Dekamin, M. G.; Kaupp, G., Gaseous nitrogen dioxide for sustainable oxidative deprotection of trimethylsilyl ethers. Phosphorus, Sulfur and Silicon and the Related Elements 2012, 187 (1), 142-148.

Salimi, A.; Mirabedini, S. M.; Atai, M.; Mohseni, M.; Naimi-Jamal, M. R., Correlating the adhesion of an acrylic coating to the physico-mechanical behavior of a polypropylene substrate. International Journal of Adhesion and Adhesives 2011, 31 (4), 220-225.

Rahimi, R.; Gholamrezapor, E.; Naimi-Jamal, M. R., Oxidation of benzyl alcohols to the corresponding carbonyl compounds catalyzed by copper (II) meso-tetra phenyl porphyrin as cytochrome P-450 model reaction. Inorganic Chemistry Communications 2011, 14 (10), 1561-1568.

Naimi-Jamal, M. R.; Kaupp, G., Unusual elastic behaviour of a wood-like material during bending, milling and nanoindentation. Wood Material Science and Engineering 2011, 6 (3), 140-146.

Mirzamohammadi, S.; Aliov, M. K.; Aghdam, A. S. R.; Velashjerdi, M.; Naimi-Jamal, M. R., Tribological properties of tertiary Al2O3/CNT/ nanodiamond pulsed electrodeposited Ni-W nanocomposite. Materials Science and Technology 2011, 27 (2), 546-550.

Kaupp, G.; Naimi-Jamal, M. R., Nutshells' mechanical response: From nanoindentation and structure to bionics models. Journal of Materials Chemistry 2011, 21 (23), 8389-8390.

Javanshir, S.; Ohanian, A.; Heravi, M. M.; Naimi-Jamal, M. R.; Bamoharram, F. F., Ultrasound-promoted, rapid, green, one-pot synthesis of 2′-aminobenzothiazolomethylnaphthols via a multi-component reaction, catalyzed by heteropolyacid in aqueous media. Journal of Saudi Chemical Society 2011.

Hajiali, H.; Shahgasempour, S.; Naimi-Jamal, M. R.; Peirovi, H., Electrospun PGA/gelatin nanofibrous scaffolds and their potential application in vascular tissue engineering. International journal of nanomedicine 2011, 6, 2133-2141.

Dekamin, M. G.; Yazdaninia, N.; Mokhtari, J.; Naimi-Jamal, M. R., Tetrabutylammonium phthalimide-N-oxyl: An efficient organocatalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane. Journal of the Iranian Chemical Society 2011, 8 (2), 537-544.

Zadegan, S.; Hossainalipour, M.; Ghassai, H.; Rezaie, H. R.; Naimi-Jamal, M. R., Synthesis of cellulose-nanohydroxyapatite composite in 1-n-butyl-3- methylimidazolium chloride. Ceram. Int. 2010, 36 (8), 2375-2381.

Sharifi, A.; Abaee, M. S.; Mirzaei, M.; Naimi-Jamal, M. R., One-Pot Self-Condensation of phenylboronic acid with phenols and aldehydes. Asian J. Chem. 2010, 22 (8), 6519-6523.

Naimi-Jamal, M. R.; Mashkouri, S.; Sharifi, A., An efficient, multicomponent approach for solvent-free synthesis of 2-amino-4H-chromene scaffold. Mol. Diversity 2010, 14 (3), 473-477.

Kaupp, G.; Naimi-Jamal, M. R., The exponent 3/2 at pyramidal nanoindentations. Scanning 2010, 32 (5), 265-281.

Dekamin, M. G.; Alizadeh, R.; Naimi-Jamal, M. R., Organocatalytic synthesis of cyanohydrin trimethylsilyl ethers by potassium 4-benzylpiperidinedithiocarbamate under solvent-free conditions. Appl. Organomet. Chem. 2010, 24 (3), 229-235.

Naimi-Jamal, M. R.; Seyedalikhani, M.; Mokhtari, J., Simple, efficient and solvent-free method for quantitative regeneration of carbonyl compounds from oximes by gaseous bromine. Asian J. Chem. 2009, 21 (4), 3253-3256.

Naimi-Jamal, M. R.; Mokhtari, J.; Dekamin, M. G.; Kaupp, G., Sodium tetraalkoxyborates: Intermediates for the quantitative reduction of aldehydes and ketones to alcohols through ball milling with NaBH4. Eur. J. Org. Chem. 2009, (21), 3567-3572.

Naimi-Jamal, M. R.; Hamzeali, H.; Mokhtari, J.; Boy, J.; Kaupp, G., Sustainable synthesis of aldehydes, ketones or acids from neat alcohols using nitrogen dioxide gas, and related reactions. ChemSusChem 2009, 2 (1), 83-88.

Mokhtari, J.; Naimi-Jamal, M. R.; Hamzeali, H.; Dekamin, M. G.; Kaupp, G., Kneading ball-milling and stoichiometric melts for the quantitative derivatization of carbonyl compounds with gas-solid recovery. ChemSusChem 2009, 2 (3), 248-254.

Mashkouri, S.; Naimi-Jamal, M. R., Mechanochemical solvent-free and catalyst-free one-pot synthesis of pyrano[2,3-d]pyrimidine-2,4(1H,3H)-diones with quantitative yields. Molecules 2009, 14 (1), 474-479.

Dekamin, M. G.; Sagheb-Asl, S.; Reza Naimi-Jamal, M., An expeditious synthesis of cyanohydrin trimethylsilyl ethers using tetraethylammonium 2-(carbamoyl)benzoate as a bifunctional organocatalyst. Tetrahedron Lett. 2009, 50 (28), 4063-4066.

Dekamin, M. G.; Mokhtari, J.; Naimi-Jamal, M. R., Organocatalytic cyanosilylation of carbonyl compounds by tetrabutylammonium phthalimide-N-oxyl. Catal. Commun. 2009, 10 (5), 582-585.

Naimi-Jamal, M. R.; Kaupp, G., New nanoindentation and nanoscratching parameters of thermoplastics. Macromol. Symp. 2008, 274 (1), 72-80.

Dekamin, M. G.; Javanshir, S.; Reza Naimi-Jamal, M.; Hekmatshoar, R.; Mokhtari, J., Potassium phthalimide-N-oxyl: An efficient catalyst for cyanosilylation of carbonyl compounds under mild conditions. J. Mol. Catal. A: Chem. 2008, 283 (1-2), 29-32.

Dekamin, M. G.; Farahmand, M.; Reza Naimi-Jamal, M.; Javanshir, S., Synthesis of cyanohydrin trimethylsilyl ethers catalyzed by potassium p-toluenesulfinate. Catal. Commun. 2008, 9 (6), 1352-1355.

Sharifi, A.; Mirzaei, M.; Naimi-Jamal, M. R., A facile solvent-free one-pot three-component Mannich reaction of aldehydes, amines and terminal alkynes catalysed by CuCl2. J. Chem. Res. 2007, (2), 129-132.

Naimi-Jamal, M. R.; Kaupp, G., Unusual architecture of the exceedingly tough Macadamia "nut"-shell as revealed by atomic force microscopy and nanomechanics. Int. J. Mater. Res. 2007, 98 (5), 438-445.

Sharifi, A.; Mirzaei, M.; Reza Naimi-Jamal, M., Modified Glaser reaction of terminal alkynes on KF/Alumina. Monatsh. Chem. 2006, 137 (2), 213-217.

Naimi-Jamal, M. R.; Mirzaei, M.; Bolourtchian, M.; Sharifi, A., One-pot solvent-free preparation of 2-phenyl-1,3,2-aryldioxaborins on acidic alumina. Synth. Commun. 2006, 36 (18), 2711-2717.

Kaupp G., Naimi-Jamal M. R., “Mechanically induced molecular migrations in molecular crystals”, CrystChemComm. 2005 , 7 (66), 402 - 410 .

Naimi-Jamal M. R., Kaupp G., “Quantitative evaluation of nanoindents: do we need more reliable mechanical parameters for the characterization of materials?”, Z. für Metallkunde 2005, 96(11), 1226-1236.

Naimi-Jamal M. R., Kaupp G., “ Quantitative Solvent-free Organic Synthesis“, Mansoura Journal of Chemistry 2005, 32(1), 83-106.

Zoz, H.; Kaupp, G.; Ren, H.; Goepel, K.; Naimi-Jamal, M. R., “Recycling of EAF dust by semi-continuous high kinetic process”, Metall 2005, 59(5), 293-296.

Sharifi Ali, Mirzaei Mojtaba, Naimi Jamal Mohammad Reza, “Mild and Solvent-Free Alkynylation of Ketones on the KF/Alumina Surface”, Synth. Commun. 2005, 35, 1039-1044.

Kaupp G., Naimi-Jamal M. R., “ Nanoscratching on surfaces: the relationships of lateral force, normal force and normal displacement”, Z. für Metallkunde 2004 , 95, 297-305 .

Kaupp G., Naimi-Jamal M. R., Questionable Stereoformulas of Diastereomers, Chemistry International 2004, 26(1), 15-16.

Kaupp, G.; Naimi-Jamal, M. R.; Ren, H.; Zoz, H. “ Dry and reactive ”, Process Worldwide 2003, 6(4), 24-27.

Ren, H.; Zoz, H.; Kaupp, G.; Naimi-Jamal, M. R. “ Environmentally protecting reactive milling ”, Advances in Powder Metallurgy & Particulate Materials 2003, 216-222.

Kaupp G., Naimi-Jamal M. R., Stepanenko V. A., “ Waste-free Solid-state Protection of Diols, Diamines, Amino Acids and Polyols with Phenylboronic Acid”, Chem. Eur. J. 2003, 9 , 4156-4161 .

Kaupp Gerd, M. Naimi-Jamal Reza, Maini Lucia, Grepioni Fabrizia and Braga Dario, “Mechanistic Studies of Heterophase Protonation and Deprotonation Reactions of Solid [CoIII(η5-C5H4COOH)(η5-C5H4COO)] Using Supermicroscopy”, CrystEngComm 2003, 5(84) , 474 - 479.

Kaupp G., Naimi-Jamal M. R., Ren H., Zoz H., “Reactive Dry-Milling for Environmental Protection -Encouraging Industrial Applications for High Kinetic Processing“ in: Advanced technologies based on self-propagating and mechanochemical reactions for environmental protection 2003, Chapter 6, 83-100, Transworld Research Network.

Tanaka Koichi, Hiratsuka Takaichi, Ohba Shigeru, Naimi-Jamal M. Reza, Kaupp Gerd, “ Unidirectional cis-trans photoisomerization of cis-3,3’-bis(diphenylhydroxy-methyl)stilbene in inclusion complex crystals”, J. Phys. Org. Chem. 2003, 16, 905-912.

Kaupp G., Naimi-Jamal M. R., Schmeyers J., “Solvent-Free Knoevenagel Condensations and Michael Additions in the Solid State and in the Melt with Quantitative Yield”, Tetrahedron 2003, 59, 3753-3760.

Sharifi Ali, Mirzaei Mojtaba, Naimi-Jamal M. Reza, “Copper-Catalysed Oxidative Homo-Coupling of Terminal Acetylenes on Alumina Assisted by Microwave Irradiation”, J. Chem. Res.(S) 2002, 12, 628-630.

Kaupp G., Naimi-Jamal M. R., Ren H. and Zoz H., “Environmentally Protecting Reactive Milling”, Chemie Technik 2002, 31(6), 58-60.

Kaupp G., J Schmeyers., Naimi-Jamal M. R., Zoz H., Ren H., “Reactive milling with the SimoloyerR: enviromentally benign quantitative reactions without solvents and wastes”, Chem. Engin. Sci. 2002, 57, 763-765.

Kaupp Gerd, Naimi-Jamal M. Reza, “Quantitative Cascade Condensations of o-Phenylenediamines and 1,2- Dicarbonyl Compounds”, Eur. J. Org. Chem. 2002, 8, 1368-1373.

Kaupp Gerd, Naimi-Jamal M. Reza, Schmeyers Jens, “Quantitative Reaction Cascades of Ninhydrin in the Solid State”, Chem. Eur. J. 2002, 8(3), 594-600.

Sharifi Ali, Farhangian Hossein, Mohsenzadeh Farshid, and Naimi-Jamal M. Reza, “Microwave Assisted Mannich Reaction of Terminal Alkynes on Alumina”, Monats. Chemie 2002, 133(2), 199-204.

Saidi Mohammad R., Azizi Najmoddin, Naimi-Jamal M. Reza., “Lithium perchlorate assisted one-pot three-component aminoalkylation of electron-rich aromatic compounds“, Tetrahedron Lett. 2001, 42(45), 8111-8113.

Sharifi Ali, Mirzaei Mojtaba, Naimi-Jamal M. Reza, “Solvent-Free Aminoalkylation of Phenols and Indoles Assisted by Microwave Irradiation”, Monats. Chemie 2001, 132(7), 875-880.

Sharifi Ali, Mohsenzadeh Farshid, Naimi-Jamal M. Reza, “Solvent-free Preparation of Monoacylaminals Assisted by Microwave Irradiation”, J. Chem. Res.(S) 2000, 8, 394-396.

Naimi-Jamal M. R., Ipaktschi J., Saidi M. R., “The LiClO4-Mediated Synthesis of b -(Dialkylamino) sulfoxides and b -(Dialkylamino) sulfones by Addition of a -Lithiated Salts of Sulfoxides and Sulfones to Aldehydes and (Trimethylsilyl)dialkyl amines”, Eur. J. Org. Chem. 2000, 9, 1735-1739.

Naimi-Jamal M. R., Ipaktschi J., Saidi M. R., “Aminosilylation of Aldehydes Mediated by Lithium Perchlorate, Novel Method for Synthesis of a -Silylamines”, J. Chem. Soc. Perkin Trans 1 1999, 24, 3709-3712.

Saidi M. R., Najjar-Marvdizaj Gh., Naimi-Jamal M. R., “Synthesis of b - and g - Hydroxy Estres and Diesters from (Cyclopentadienyl)-Dicarbonyliron Complexes”, Iranian Journal of Science & Technology Trans. A 1999, 23(2), 147-150 .

Zarghi A., Naimi-Jamal M. R., Webb S. A., Balalaie S., Saidi M. R., Ipaktschi J., “LiClO4 Induced Mannich Reaction. Diastereo- and Enantioselective Synthesis of b -Amino Ketones by Addition of Enamines, Imines or Silylenolethers to Aldehydes and Dialkyltrimethylsilylamines”, Eur. J. Org. Chem. 1998, 197-200.