In this study the degradation of an azo dye, Methyl Red, which is used in textile industry, using Fenton reaction was studied and optimized by a chemometrics method. Fenton oxidation is one of the Advanced Oxidation Processes (AOPs), in which hydroxyl radicals are generated from Fenton’s reagents (Fe2+, H2O2). The effects of various experimental parameters in this reaction were investigated using Central Composite Design (CCD) method. The experimental design was done at five levels of operating parameters. 28 experiments, with 4 factors and 5 levels for each factor were designed. These factors (or variables) include [Fe2+], [H2O2], [oxalate] and the reaction time. A full-quadratic polynomial equation between the percentage of dye degradation (as the response) and the studied parameters was established. After removing the non-significant terms from the model, response surface method was used to obtain the optimum conditions. The optimum ranges of variables were: 0.1 - 0.4 mM for [Fe2+], 13.5-22 mM for [H2O2], 1.5-2 mM for [Oxalate], and 115-125 min for the reaction time. Also the results of extra experiments showed that these optimized values can be used for real samples and yield to high values for the response.

Azami, M., Bahram, M & Nouri, S. (2013). Central composite design for the optimization of removal of the azo dye, Methyl Red, from waste water using Fenton reaction.Current Chemistry Letters, 2(2), 57-68.

Gomathi Devi L., Girish Kumar S., Mohan Reddy K., Munikrishnappa C. (2009) Photo degradation of Methyl Orange an azo dye by Advanced Fenton Process using zero valent metallic iron: Influence of various reaction parameters and its degradation mechanism. J. Hazard. Mater.,164, 459-467.

Hameed B.H., Lee T.W. (2009) Degradation of malachite green in aqueous solution by Fenton process. J. Hazard. Mater.,164, 468-72.

Garc´ıa-Monta˜no J., P´erez-Estrada L., Oller I., Maldonado M. I., Torrades F., Peral J. (2008) Pilot plant scale reactive dyes degradation by solar photo-Fenton and biological processes. J. Photochem. Photobiol., 195, 205-214.

Khataee A. R., Zarei M., Moradkhannejhad L. (2010) Application of response surface methodology for optimization of azo dye removal by oxalate catalyzed photoelectro-Fenton process using carbon nanotube-PTFE cathode. Desalination., 258,112-119.

Rodrıguez A., Ovejero G., Sotelo J. L., Mestanza M., Garcıa J. (2010) Heterogeneous Fenton catalyst supports screening for mono azo dye degradation in contaminated wastewaters. Ind. Eng. Chem. Res., 49, 498-505.

Zhou M., He J. (2007) Degradation of azo dye by three clean advanced oxidation processes: Wet oxidation, electrochemical oxidation and wet electrochemical oxidation-A comparative study. Electrochim. Acta., 53,1902-1910.

Pourbabaee A., Malekzadeh F., Sarbolouki M. N., Mohajeri A. (2005) Decolorization of Methyl Orange (as a model azo dye) by the newly discovered Bacillus Sp. Iran. J. Chem. Chem. Eng., 24, 41-45.

Jain R., Varshney S., Sikarwar S. (2007) Electrochemical techniques for the removal of Reactofix Golden Yellow 3 RFN from industrial wastes J. Iran. Chem. Soc.., 313, 248-253.

Wang H., Niu J., Long X., He Y. (2008) Sonophotocatalytic degradation of methyl orange by nano-sized Ag/TiO2 particles in aqueous solutions. Ultrason. Sonochem., 15, 387-392.

10.Diagne M., Oturan N., Oturan M. A. (2007) Removal of methyl parathion from water by electrochemically generated Fenton's reagent. Chemosphere, 66, 841-848.

11.Zarei M., Niaei A., Salari D., Khataee A. R. (2010) Removal of four dyes from aqueous medium by the peroxi-coagulation method using carbon nanotube–PTFE cathode and neural network modelling, J. Electroanal. Chem., 639, 167-174.

12. Daneshvar N., Hejazi M.J., Khataee A.R., Rangarangy B. (2004) Photocatalytic degradation of an organophosphorus pesticide phosalone in aqueous suspensions of titanium dioxide. J. Environ. Heal. B., 39, 285-296.

13.Kurbus T., March Slokar Y., Majcen Le Marechal A., Voncinab D. B. (2003) The use of experimental design for the evaluation of the influence of variables on the H2O2/UV treatment of model textile waste water. Dyes and Pigments, 58, 171-178.

14.Sun S. P., Li C. J., Sun J. H., Shi S. H., Fan M. H., Zhou Q. (2009) Decolorization of an azo dye Orange G in aqueous solution by Fenton oxidation process: Effect of system parameters and kinetic study. J. Hazard. Mater., 161,1052-1057.

15.Gutowska A., Ka1uzna-Czaplinska J., Jozwiak W.K. (2007) Degradation mechanism of Reactive Orange 113 dye by H2O2/Fe2þ and ozone in aqueous solution. Dyes and Pigments,74, 41-46.

16.Kurbus T., Slokar Y. M., Majcen Le Marechal A., Voncina D. B. (2003)The use of experimental design for the evaluation of the influence of variables on the H2O2/UV treatment of model textile waste water. Dyes and Pigments, 58, 171-178.

17.Arau´ jo P.W., Brereton R.G. (1996) Experimental design II. Optimization. Trends Anal. Chem., 15, 63-70.

18.Brandvik P. J. (1998) Statistical simulation as an effective tool to evaluate and illustrate the advantage of experimental designs and response surface methods. Chemomet. Intell. Lab. Syst., 42, 51-61.

19.Parida K.M., Sahu N., Biswal N.R., Naik B., Pradhan A.C. (2008) Preparation, characterization, and photocatalytic activity of sulfate-modified titania for degradation of methyl orange under visible light. J. Iran. Chem. Soc., 318, 231-237.

20.Lau W. J., and Ismail A. F. (2010) Application of response surface methodology in pes/speek blend NF membrane for dyeing solution treatment. Membrane Water Treatment, 1, 49-60.

21.Daneshvar N., Salari D., Khataee A.R. (2003) Photocatalytic degradation of azo dye acid red 14 in water: investigation of the effect of operational parameters, J. Photochem.Photobiol.,157,111-116.

22.Kincl M., Turk S., Vrecer F. (2005) Application of experimental design methodology in development and optimization of drug release method, Int. J. Pharm., 291, 39-49.

23.Zhang X., Wang R., Yang X., and Yu J. (2007) Central composite experimental design applied to the catalytic aromatization of isopherone to 3,5-xylenol. Chemometr. Intell. Lab. Sys., 89, 45-50.

24.Avila A., Sanchez E.I., Gutierrez M.I. (2005) Optimal experimental design applied to the dehydrochlorination of poly(vinyl chloride), Chemom. Intell. Lab. Syst. 77, 247-250.

25.Gorji S., Bahram M. (2010) Experimental design for the study and optimization of the effect of different surfactants on the spectrophotometric determination of sulfide based on phenothiazine dye production. Anal. Methods, 2, 948-953.